ABSTRACT

The aim of this study was to investigate the structural composition of lignin (LIPE®) extracted from Eucalyptus grandis, before and after exposure to the gastrointestinal tract of ruminants. For this study lignin was isolated, purified and characterized using ¹H and ¹³C Nuclear Magnetic Resonance Spectroscopy, nitrobenzene oxidation, functional groups analysis and gas chromatography with mass spectroscopy. To have a better understanding of lignin morphology and of its ultra structure, electron microscopy in wood cell wall was utilized. The lignin fecal samples showed similar ¹H NMR spectrums and nitrobenzene oxidation products compared with LIPE®. The result of the microanalysis of LIPE® was similar to data shown in the literature. The ultra structure of lignin was similar to that of Bamboo (hard wood). The lignin isolated from feces of sheep was identical to the original LIPE®, which means that this product can be used as an external marker in protein digestibility in sheep.

Keywords:

Lignin, Eucalyptus grandis, Ruminant

1. Introduction

Use of the term “fiber” was in vogue as early as in the 1800’s, but confirmed largely to refer to forage. The concept of “crude fiber” determined routinely in food and feed as a part of proximate analysis was evolved later to refer to the residue left over after treatment with acid and alkali. The term “dietary fiber” was coined in 1953 to refer to the non-digestible residue in foods [1] , but it is mainly applied in human nutrition and it is mainly composed of cellulose, hemicelluloses, pectin, lignin, silica and cutin.

Over 500 species of microorganisms are present in the cecum and in the rumen. These fermentors’ anaerobic microbes, mainly fiber, produce energy in the form of fatty acids as acetate, propionate and butyrate. However, non-digestible portion of the fiber does not produce energy, and prevents the digestibility of the cell wall by various mechanisms.

Besides the structural polysaccharides, lignin is a main component of cell wall of forages, crop residues and wood and it is indigestible.

The formation of lignin molecule begins with a dimerization of the radical to give dilignols. The dilignols are formed by β-o-4, β-5, β-β bonds, and others. These are types of bonds interconnecting aryl propane units in lignins [2] . The continued growth of the molecule takes place primarily by what has been called “end-wise” polymerization [3] . In the lignifying cell there will be a low stationary concentration of the monomer, for instance, coniferyl alcohol. Therefore, dimerization of the monomer radicals will be less favored than their cross coupling with phenotype radicals formed by dehydrogenation of the phenolic end groups of dilignols or larger polymers [2] . The end product is the polymer called lignin.

Studies on the chemical structure of lignin require isolation, characterization by analysis of functional groups; by a series of degradation techniques such as nitrobenzene oxidation, oxidation with permanganate thioacidolysis, GC-MS, and other techniques ¹H and ¹³C NMR spectroscopy.

The nitrobenzene oxidation is a classical method to get an estimate of pattern of the aromatic residues in different lignins, in which p-hydroxyphenyl (H), guaiacyl (G) and syringyl (S) are oxidized to p-hydroxy-benzaldehyde, vanillin and syringaldehyde respectively [3] . The mechanism proceeds through two steps, of which the first is the alkaline hydrolysis of the alkyl aryl ether linkages combined with side chain modification. The second step is the oxidation of the side chain with the generation of aromatic aldehydes of various types which reflect structural features of the parent lignin [4] .

In the more recent years Nuclear Magnetic Resonance spectroscopy (NMR) has become a very valuable tool for structural lignin studies and have very interesting results from carbon-13 (¹³C) on grass lignin and wood lignin. This study confirms that all three (H, G, and S) residues are important constituents of these lignins. Their study also reveals that p-coumaric acid and ferulic acid residues also are present. These acids are linked by their phenolic groups via ether bonds to lignin [5] .

Advanced ¹H-¹³C correlation 2D NMR spectroscopic techniques include HMQC (Hetheronuclear Multiple Quantum Coherence) and HMBC.

(Hetheronuclear Multiple Quantum Bond Coherence) sequences provide resolution of overlapping signals with higher probability in correct assignment of the signals, giving a very powerful method to observe qualitative changes in the lignin structure. The HMQC sequence gives information about the correlation between ¹H and ¹³C atoms via one bond coupling 1J (C, H), while the HMBC sequence provides information about long range correlation between ¹H and ¹³C atoms via two bond coupling, 2J (C, H), and three bond coupling, 3J (C, H). Thus, chemical shifts for carbon and hydrogen in CH, CH₂, and CH₃ groups in a compound can be accurately assigned when the HMQC spectrum of the compound is correlated with the corresponding HMBC spectrum [6] .

Many staining techniques have been used in combination with light microscopy to study the distribution of lignin in wood [7] . However, since the advent of electron microscopy, considerable efforts have been made to obtain a better understanding of lignin morphology in wood cell walls. One of the limitations of electron microscopy is that it allows only a visual characterization of the cell structure. Once electron microscopy is combined with energy dispersive X-ray analysis (EDX-A), the system becomes a powerful analytical tool for elucidating the fine details of lignin morphology in wood [8] . In an electron microscope, the incident electron beam impinges upon the specimen and excites the emission of electrons. The emitted electrons are utilized in scanning electron microscopy (SEM) to create a surface image of the specimen on a cathode-ray tube, in contrast to transmission electron microscopy (TEM), which uses transmitted electrons in visualizing the image.

A plant cell consists of core (cell content) and cell wall, which allows the plant to grow thick when age [9] . The supporting tissue has thick walls, lignified or not. The esclerénquima is a lignified tissue, and its function is mechanical [10] .

The aim of this study was to characterize the structure of lignin isolated from Eucalyptus grandis before and after exposure to the gastrointestinal tract of sheep to see if it can be used as an external marker in digestibility studies.

2. Materials and Methods

1) Wood, isolation, purification of lignin:

The wood utilized was Eucalyptus grandis, six year old. LIPE® preparation is index patent n PI0304736-9.

2) Feces collection:

Five sheep were distributed in individual metabolic cages, where separate feces and urine, and feces were collected for analysis. The animals were fed 100% Tifton 85 hay allowing 20% of remainders and mineral salt ad libtum. The composition of feed is shown in Table 1.

The experimental period comprised two days of adaptation with LIPE® and seven days for samples of feces collection. The animals were given 0.1 g of LIPE® once a day during nine consecutive days.

3) Chemical analyses:

The samples were analyzed by NMR techniques (¹H and ¹³C NMR, HMQC) equipment BRUKER AVANCE 500MHZ spectrometer.

Microanalysis was performed at CALI LABORATORIES, North Caroline USA.

Nitrobenzene oxidation products analysis in the GC MS.

4) Electron Microscopy was used for determination of lignin (LIPE®) ultra structure by a scanning electron microscopy (SEM) using equipment Carl Zeiss MEVDSM 950. The SEM analysis were made after drying LIPE® in a stove at 39˚C and made metallic with gold in an equipment CV 052 Balzer.

3. Results and Discussion

To check if LIPE® was altered during the digestive processes, it was analyzed in the original form and isolated from the fecal samples by NMR techniques (¹H and ¹³C NMR, HMQC), nitrobenzene oxidation, microanalysis and electron microscopy.

The fecal samples showed similar ¹H NMR spectrums than LIPE®, with characteristic signals between: δ_H 11.00 and 9.00 due to formyl hydrogens, δ_H 7.00 to 9.00 due to phenolic and aromatic hydrogens, δ_H 6.00 and 7.00 due to aromatic and Ha in β-O-4 units hydrogens and δ_H at 3.77 due to methoxyl hydrogens and also big signals characteristics of carbohydrates between δ_H 4.50 and 5.50.

The result of the microanalysis was 57.27% C, 4.36% H for LIPE® before and after exposure tract digestive. Values for milled wood lignins Eucalyptus grandis are 56.50% C, 6.40% H values are for bamboo 61.66% C, 5.53% H [11] . Saliba (1998) studied maize and soybeans lignins found values C = 61.49% and 65.49%, respectively. Hydrogen concentration was 6.06% and 8.44% for corn and soybeans lignins respectively [12] .

The data of nitrobenzene oxidation was vanillin (V) = 49.8 mg%, Syrigaldheide (S) = 50.2 mg% from LIPE® and V = 50.0 mg% and S = 49.18 mg% from feces lignin.

Considering the similar levels of V and S in LIPE® and in the feces of the animals that received LIPE® it is observed that in the fecal lignin was recovered all the V and S given to the animals. Thus, LIPE was totally recovered in the feces, showing that passed through the gastrointestinal tract of sheep without being digested or absorbed which means that it may be used as an effective external marker in digestibility trials with sheep.

The Figure 1 shows the LIPE® SEM. When compared this LIPE® with the corn lignin showed by Saliba [13] and that showed by Fengel & Wegerner [11] , the ultra structure of LIPE® was similar of the Bamboo (hard wood).

Lignin degradation is an oxidative process and needs the presence of oxygen. In fact, lignin is degraded much faster in the presence of pure oxygen than in the presence of air, and ligninolytic activity is not observed under low oxygen partial pressures (5.07 Pa). Therefore, lignin degradation is affected by oxygen at two stages, firstly stimulating

the transcription of the ligninolytic enzyme system and secondly at the time of oxidation of lignin [14] . Based on these concepts, pure lignin should not be degraded in the rumen of ruminants, and since non-ruminant are not able to metabolize lignin, purified lignin may also be able to be used as an external marker of fecal output in those animals.

4. Conclusion

The lignin isolated from feces of sheep was identical to the original LIPE®, which means that this product can be used as an external marker in protein digestibility in sheep.

Cite this paper

Saliba, E.O.S., Pilo-Veloso, D., Rodriguez, N.M., Capanema, E.A., Saliba, J.S., Borges, A.L.C.C., Gonçalves, L.C., Borges, I., Jayme, D.G. and Silva, R.R. (2016) Characterization of Lignin before and after Exposure to the Gastrointestinal Tract of Ruminants. American Journal of Analytical Chemistry, 7, 748-753. http://dx.doi.org/10.4236/ajac.2016.711067

References