ABSTRACT

There are at least two reasons why one would study the gravitational field of a disk. The first is that many astronomical objects, such as spiral galaxies like the Milky Way, are disk-like. The second is that the field of a disk is interesting, particularly when compared to that of a spherical, or near-spherical, object, which is much easier to analyze because of its high degree of symmetry. It is hoped that this study will augment previous work on this subject. The aspects presented in this paper are as follows: 1) both the radial and vertical gravitational fields of a thin disk within the plane of the disk and above it; 2) a comparison of some of the field results obtained by Lass and Blitzer (1983) involving elliptic integrals to those obtained by a standard numerical integration, now available online, and separately through the use of Legendre polynomials; 3) the logarithmic divergence of the radial field at the edge of a thin disk; 4) the fields in the plane of a disk containing a central hole, particularly within the hole, such as the rings of Saturn; 5) circular orbits within the plane of a single disk and half way between two disks, and their stability; 6) the escape velocity at a point within the Milky Way, particularly at the position of the solar system and without any added, or subtracted, orbital effects around the galactic center; and 7) the radial field at the circular edge of a disk of finite thickness.

Keywords:

Disk-Shaped Mass, Gravitational Effects of a Disk-Shaped Mass, Calculational Techniques of Such Gravitational Effects

1. Introduction

Although many astronomical objects, such as stars, planets, and certain galaxies, are spherical, or nearly spherical, in shape, many others are disk-like. Examples of the latter are bar spiral galaxies (such as the Milky Way), the rings of Saturn, viewed as disks with a large central hole, and protoplanetary disks, consisting of dense gas and dust surrounding a newly formed star that add mass to the star [1] . Thus, the gravitational fields of such structures have been studied, and we hope that the work presented here on various aspects of the gravitational fields of uniform disks, albeit a geometric simplification, will augment previous work and be of general interest as a problem in physics.

Certain Previous Work (Lass and Blitzer)

Two examples of previous work on the gravitational field of an infinitely thin disk are by Lass and Blitzer [2] and Krough, Ng, & Snyder [3] , both published in the early 1980s. Neither presented specific graphic examples of their mathematical results, which would have made them more concrete for the reader. We will do so here, but only for the paper by Lass and Blitzer. Other augmentations of the paper by Lass and Blitzer will also presented.

With reference to Figure 1, the following is their expression for the gravitational potential, V(r, z), for r < a.

$\begin{array}{c}V\left(r,z\right)=2\sigma G[\text{π}\left|z\right|-\sqrt{z^2+{\left(a+r\right)}^2}E\left(k\right)\\ -\left[\left(a^2-r^2\right)/\sqrt{z^2+{\left(a+r\right)}^2}\right]K\left(k\right)\\ -\left[\left(\left(a-r\right)/\left(a+r\right)\right)z^2/\sqrt{z^2+{\left(a+r\right)}^2}\right]\Pi \left(n,k\right)].\end{array}$ (1)

For r > a, the first term, $\text{π}\left|z\right|$ , is eliminated because there is no surface mass beyond r = a. Thus, the z-component of the field at z = 0 is zero there, while it is not zero for z < a, where there is surface mass. Regarding the meaning of the symbols not noted in Figure 1, σ is the mass per unit area of the disk; G is Newton’s gravitational constant, and K(k), E(k), and Π(n, k) are the complete elliptic integrals of the first, second, and third kind, respectively. The parameters k and n are defined such that $k^2=4ar/\left[z^2+{\left(a+r\right)}^2\right]$ and $n=4ar/{\left(a+r\right)}^2$ . We note that at z = 0, k² = n. As to the complete elliptic integrals, they have the following integral representations, as stated in [4] ,

$\begin{array}{l}K\left(k\right)={\int }_0^1\frac{\text{d}t}{\sqrt{\left(1-t^2\right)\left(1-k^2{t}^2\right)}};\\ E\left(K\right)={\int }_0^1\frac{\text{d}t\sqrt{1-k^{2}t}}{\sqrt{1-t^2}};\\ \Pi \left(n,k\right)={\int }_0^1\frac{\text{d}t}{\left(1-n{t}^2\right)\sqrt{\left(1-t^2\right)\left(1-k^2{t}^2\right)}};\end{array}$ (2)

Although it is of no consequence, we should be aware of a slight difference in notation between [2] and [4] What [4] refers to as n is called n² in [2] . Since [4] is a more modern publication, we shall adhere to its convention and define 4ar/(a + r)² as n.

To obtain the force in the radial direction, F_r, we calculate ?∂V(r, z)/∂r, which involves the sums of the derivatives of the three products of functions in Equation (1). When that is done, the force within the plane of the disk (where z = 0) can be expressed as:

$\begin{array}{l}{F}_r\left(z=0\right)/2G\sigma \\ =-\left[\frac{1+r_a^2}{r_a\left(1+r_a\right)}\right]K\left(k\right)+\left[\frac{\left(1+r_a\right)\left(2+r_a\right)}{2r_a}\right]E\left(k\right)-\left[\frac{{\left(1-r_a\right)}^2}{2\left(1+r_a\right)}\right]\Pi \left(n,k\right)\end{array}$ (3)

In this equation, r_a ≡ r/a, is a relative coordinate. If z ≠ 0, then z_a ≡ z/a, would also be used in the equation for F_r(z ≠ 0)/2Gσ. Since the product rule for derivatives is used in deriving Equation (3), one might wonder why no derivatives of the elliptic integrals appear in it. This apparent anomaly exists because the derivatives of all three elliptic integrals can be expressed in terms of the elliptic integrals themselves, as shown in [4] .

The scaled radial field in the plane of the disk is plotted in Figure 2, for 0 ≤ r_a ≤ 1. The elliptic integrals were evaluated numerically with the help of “Keisan Online Calculator” [5] . The field is negative because it is directed in the negative r-direction. For comparison, the scaled radial field for a solid sphere of radius “a” is shown in Figure 3. The two fields are qualitatively similar, but the field for a sphere increases linearly in r_a for r_a ≤ 1 and is finite for r_a = 1. That is not true for the field of the disk, a two-dimensional object, for which the field behavior is curved for r_a < 1 and diverges to negative infinity at r_a = 1, as suggested by the arrow pointing straight down at that point in Figure 2. The behavior of the curve near r_a = 1 is logarithmic, and is caused by K(k) in that region. The logarithmic behavior of K(k) for 0.8 ≤ r_a ≤ 1.2 is shown in Figure 4, although that graph is a specific numerical evaluation, as opposed to an analytic proof. However, an analytic proof is presented in “Mathematics Stack Exchange” [7] for elliptic integrals. The logarithmic divergence at r_a = 1 is reasonable when one considers the divergence at a point mass (of zero dimension) to be (1/r²) and at a line mass of any length to be a more gradual (1/r) (one-dimensional). In this case, we are dealing with the edge of a two-dimensional mass distribution and expect an even more gradual divergence, which the logarithmic divergence is.

In addition, a view of the complete elliptic integral of the third kind in [5] , when both arguments are near unity, suggests a divergence of Π(n, k) in that region. Indeed, it does diverge, but with what behavior? The graph in Figure 5,

obtained in the same way as that for K(k), demonstrates that Π(n, k) diverges as 1/(1 − r_a)². However, its coefficient in Equation (3) contains (1 − r_a)². Thus, the final term in Equation (3) is finite at r_a = 1, as is the second term because of the normal behavior of E(k) over the entire range of k. Therefore, the behavior of the field at r_a = 1 is due do solely to K(k) there.

Certain Current Work

In this section, we examine two other methods of calculating the same radial field as above. These are the use of “standard” numerical integration and Legendre Polynomials.

2. Numerical Integration

Figure 6 is relevant to the use of numerical integration.

The gravitational field, V(r_o), will be first calculated and then F_r(r_o) will be calculated from −∂V/∂r_o, as above. Now,

$\begin{array}{c}V\left(r_o\right)=-2G\sigma [{\int }_0^a\text{d}y{\int }_0^{\sqrt{a^2-y^2}}\frac{\text{d}x}{\sqrt{{\left(r_o-y\right)}^2+x^2}}\\ +{\int }_0^a\text{d}y{\int }_0^{\sqrt{a^2-y^2}}\frac{\text{d}x}{\sqrt{{\left(r_o+y\right)}^2+x^2}}]\end{array}$ (4)

The first term represents the contribution from the right half of the disk in Figure 6, while the second represents the contribution from the left half of the disk. After calculating −∂V/∂r and performing a variety of tedious algebraic manipulations, we obtain, using the relative coordinates r_a and y_a, the expression for the radial component of the force, F(r_a):

$\begin{array}{l}F\left(r_a<1\right)=2G\sigma [{\int }_0^1\frac{\text{d}{y}_a\left(r_a-y_a\right)}{\left(\sqrt{1-y_a^2}+\sqrt{1+r_a^2-2y_a{r}_a}\right)\sqrt{1+r_a^2-2y_a{r}_a}}\\ +{\int }_0^1\frac{\text{d}{y}_a\left(r_a+y_a\right)}{\left(\sqrt{1-y_a^2}+\sqrt{1+r_a^2+2y_a{r}_a}\right)\sqrt{1+r_a^2+2y_a{r}_a}}+\text{ln}\left(\left(1-r_a\right)/\left(1+r_a\right)\right)]\end{array}$ (5)

For r_a > 1, the expression for the force is the same, except that (1 − r_a) within the logarithm is replaced by (r_a − 1). We note that the logarithmic divergence appears explicitly in the expression for the force at r_a = 1, as opposed to the expression in Equation (3). The “standard” numerical integration is used to calculate numerical value of the two integrals in Equation (5) over the range of r_a. This procedure is available online in [6] . In Figure 7 are three curves representing the radial force. Two of them indicate that Equations (3) and (5) produce indistinguishable results, as they should. The third, based on a particular sum of Legendre polynomials, produces agreement with the other two methods, except near r_a = 1, which we shall now examine.

3. Legendre Polynomials

Figure 8 shows the azimuthally symmetric disk geometry needed for the use of Legendre polynomials of varying degree l, P_l(cosθ). The gravitational potential, V(r, θ), is expressed, for this geometry, as:

$V\left(r,\theta \right)={\sum }_0^{\infty }{A}_l{r}^l{P}_l\left(\cos \theta \right);r<a$ (6a)

$V\left(r,\theta \right)={\sum }_0^{\infty }{B}_l{r}^{-\left(l+1\right)}{P}_l\left(\cos \theta \right);r>a$ (6b)

In the case of other azimuthally symmetric geometries, such as the annular region between a disk and a ring, the potential could be expressed as the sum of these two equations. These expressions are standard for solutions of Laplace’s Equation with azimuthal symmetry and can be found in any textbook on the subject.

Since P_l(1) = 1 for all l, we first determine V(r, θ) on-axis, where θ = 0, as in Figure 8, and expand the potential in powers of (r/a) for r < a, and in powers of (a/r) for r > a. We then multiply each term in either series by P_l(cosθ) and sum over the chosen number of products in the resultant series. In our case, where the potential is in the plane of the disk, θ = π/2, and all terms involve even l = 2n. As stated in [8] , another website for “Mathematics Stack Exchange”, $P_{2n}\left(\cos \theta \right)=P_{2n}\left(0\right)={\left(-1\right)}^n\left(2n\right)!/2^{2n}{\left(n!\right)}^2$ . All odd terms, P_2n+1(0), are zero. The on-axis potential, V(r, 0) is:

$V\left(r,0\right)=-\left(2G\sigma \right)\text{π}\left[\sqrt{r^2+a^2}-r\right]$ (7)

For r < a, one factors out the a-term under the square root, which allows for the expansion of the potential in powers of (r/a). Factoring out the r-term allows for the expansion in powers of (a/r). After performing the expansions out to a respectable six terms (the chosen number), making use of the expressions for P_2n(0), and calculating the derivative −∂V/∂r, we obtain the following for F_r:(using the relative coordinate r_a)

$\begin{array}{l}{F}_r=-\left(2G\sigma \right)\text{π}[0.5r_a+0.1875r_a^3+\left(0.1171\cdots \right)r_a^5+\left(0.0854\cdots \right)r_a^7\\ +\left(0.06729\cdots \right)r_a^9+\left(0.0555\cdots \right)r_a^{11}];r_a<1\end{array}$ (8a)

$\begin{array}{l}{F}_r=-\left(2G\sigma \right)\text{π}[\frac{0.5}{r_a^2}+\frac{0.1875}{r_a^4}+\frac{\left(0.1171\cdots \right)}{r_a^6}+\frac{\left(0.0854\cdots \right)}{r_a^8}\\ +\frac{\left(0.06729\cdots \right)}{r_a^{10}}+\frac{\left(0.0593\cdots \right)}{r_a^{12}}];r_a>1\end{array}$ (8b)

Although it is difficult to resolve details, Figure 8 shows how well the use of Legendre polynomials agrees with the other two methods, except near r_a = 1. An expanded view of this region is shown in Figure 9, where we can see the disagreement developing between 0.8 < r_a < 1.2. As the curve of F_r vs r_a grows steeper in its approach, from either direction, to the logarithmic divergence at r_a = 1, more terms in the Legendre expansion are needed to accurately describe it. An even more respectable eight terms in the expansion would shrink the range of disagreement to 0.9 < r_a < 1.1. As a motivation for their paper, Lass and Blitzer [2] make a general comment concerning the inconveniently large number of terms required for an accurate Legendre expansion, but no specifics are given.

4. Z-Dependence of the Radial Field and the Field in the Z-Direction

So far, we have only looked at the radial field in the plane of the disk, but what about the radial field at different values of z_a and the vertical field at different values of r_a? Both of these fields can be readily calculated using the “standard” numerical integration, as in Equation (4), but with the inclusion of z_o in the expression for distance, as in Equation (9). The potential gradient, −∂V/∂r, is then calculated.

$\begin{array}{c}V\left(r_o,z_o\right)=-2G\sigma [{\int }_0^a\text{d}y{\int }_0^{\sqrt{a^2-y^2}}\frac{\text{d}x}{\sqrt{{\left(r_o-y\right)}^2+z_o^2+x^2}}\\ +{\int }_0^a\text{d}y{\int }_0^{\sqrt{a^2-y^2}}\frac{\text{d}x}{\sqrt{{\left(r_o+y\right)}^2+z_o^2+x^2}}]\end{array}$ (9)

Figure 10 shows the first of these results for z_a = 0, 0.2, and 0.4. The basic shapes are the same for all three curves, but there is no logarithmic divergence for values of z_a > 0 because there is no edge to the mass distribution at those levels. As with the first curve, these two curves do peak at r_a = 1 because at that point, all of the mass exerts a force in the same direction; there is no cancellation in the radial direction. Although that is also true for r_a > 1, the distance to r_a has increased to all of the mass points on the disk.

Figure 11 shows the field in the z-direction, F_z (=−∂V/∂z), for various values of r_a, both less than and greater than 1. For all r_a < 1, F_z = −2πσG at z = 0. This

result follows from the Gaussian formulation of the law of gravitation, ÑF = −4πGρ, where F is the gravitational field and ρ is the mass density at each point. Using a Gaussian pillbox, as in electrostatics, that straddles the surface mass density of the disk, along with the integral form of Gauss’ law, leads to the result. All mass points on the disk, other than the one in question, only contribute to the field parallel to the surface of the disk at z = 0.

We note that F_z = 0 for all r_a > 1and z = 0, where there is no surface mass (σ = 0). We could also note that by planar anti-symmetry, the field above the disk points in the negative z-direction, while that below points in the positive z-direction. Since there is no discontinuity in the field for r_a > 1 and z_a = 0, what else could the field be for those values of r_a and z_a? Apropos of these comments, Figure 12 illustrates the F_z in the plane of a disk with a hole in it. Within the entire area of hole and the region beyond the disk, F_z = 0 in the plane of the disk.

This is definitely not true for the radial field, as we now discuss in the case of a solid disk containing a hole of half of its area and centered within it. The radial field can readily be obtained from linear superposition by subtracting the field of a smaller disk, identical in size and position of the hole, from that of the solid disk. Figure 13 shows the fields of the two disks, while Figure 14 shows the result of the subtraction. The counter-intuitive result is that radial field within the hole is in the positive radial direction and increases to the edge of the hole, where the logarithmic divergence occurs. It continues in that direction, with reduced magnitude, into bulk of the remaining mass of the original disk, until r_a ≈ 0.81. At that point, the field becomes negative and stays that way for all r_a > 0.81, eventually approaching zero for large r_a.

By comparison, Figure 15 shows the gravitational field, F_s, of a sphere of mass density ρ, radius a, and a central hole of half the volume of the sphere. Because of its spherical symmetry, this is a simple problem, also solved with linear superposition, whose solution is:

$F_s=\left(\frac{4\text{π}}{3}\right)Ga\rho \left[r_a-\frac{1}{2r_a^2}\right];{0.5}^{1/3}\le r_a\le 1$ (10a)

$F_s=\left(\frac{\text{2π}}{3}\right)\frac{\left[Ga\rho \right]}{r_a^2};r_a\ge 1$ (10b)

F_s = 0 within the hole, where 0 ≤ r_a ≤ 0.5^1/3.

5. Disk of Non-Zero Thickness

Until now, we have concentrated on a disk of zero thickness. In this section, we consider the radial gravitational field of a uniform disk of non-zero thickness T equal to a maximum of one tenth of its fixed radius “a”. Two different situations are considered, as shown in Figure 16. In situation A, the field point X is fixed at the lowest corner, while the relative thickness of the disk can change from 0 to T_a = 0.1. The field at X is determined as a function of the relative thickness, Z_a (≤T_a). In situation B, the relative thickness is a constant T_a, but the field point X moves from the lower corner along the outer surface of the disk to the top corner. The field at X is determined as a function of its relative position, z_a. There are two contributions to the field in situation B: the section of the disk above z_a and the one below. For a disk of constant radius with respect to height, these contributions will have already been determined in situation A.

These contributions are determined by breaking up the disk into thin slices and considering each slice to be a disk of zero thickness, having a vertical separation from point X. The contribution from a given slice is calculated as in Equation (9) and taking its radial gradient at r_a = 1. The total contribution is obtained by integrating the individual contributions over the relative thickness, Z_a. Figure 17 illustrates the geometry.

Figure 18 shows the contribution to the field at X as a function of z_a. The function is obviously linear in ln(z_a) over the range of consideration. The curve would deviate significantly from linearity for much larger z_a because the

contribution must asymptotically approach zero for very thick disks. Calling the function F(z_a),

$F\left(z_a\right)=-\ln \left(z_a\right)+0.0869$ (11)

To obtain the total contribution at X for situation A, these contributions must be summed from 0 to Z_a. Thus, the total contribution over that thickness is:

${\int }_0^{Z_a}F\left(Z_a\right)\text{d}{Z}_a=-Z_a\ln \left(Z_a\right)+1.0869Z_a$ (12)

Aside from a scale factor, this equation is plotted in Figure 19 as A. Graph B is obtained by adding the contributions from the entire regions above and below X, as obtained from A. The symmetry about z_a = 0.05 is obvious, as are values at the end points, both of which receive contributions from the entire disk.

6. Properties of Circular Orbits in the Plane of a Disk

The properties of these circular orbits considered are the orbital period as a function of their radius measured from the center of the disk and the mass of the disk. The disk is assumed to be an approximate representation of the Milky Way with the same mass and diameter. The estimated diameter of the Milky Way is 10⁵ ly [9] , among others, and the estimated mass is 1.4 × 10⁴² kg [10] . Since the mean thickness of the Milky Way is estimated to be only about (1 - 2) × 10³ ly [9] , it will be ignored. In addition, the stability of such orbits with respect to radial perturbations and perturbations perpendicular to the plane of the disk are considered.

Finding the period of the orbit is a simple problem in orbital mechanics. Assuming the radial field, F(R), beyond the disk is as in Figure 2, but including 2Gσ, then

$F\left(R\right)=\frac{V^2}{R},$ (13)

where V and R are the orbital speed and radius, respectively. The period T is

$T=\frac{2\text{π}R}{V}=2\text{π}\sqrt{R/F}$ (14)

Figure 20 shows the orbital period in billions of years plotted against the orbital radius in light years, up to 5 × 10⁵ ly. Galaxies that are less than this distance from the Milky Way are listed in [11] , but no information allowing for a comparison to Figure 20, if any exists, has been found by this author. It is of some interest, however, to determine at what orbital radius the orbital period deviates negligibly from that of a point mass of the same mass as the disk. A simple calculation shows that the radius is about 75 × 10³ ly, or 1.5 galactic radii, which suggests a rapid march toward the asymptotic limit (but not as rapid as in the case of a sphere!). The result for a disk was arrived at by noting that the period of the orbit of radius R around a point mass is, coincidentally, proportional to R^1.5. Thus, if Figure 20 were displayed on a log-log plot, its behavior would become essentially linear starting at about 1.5 galactic radii. Figure 21 is such a plot showing the transition to linearity, with a slope of about 1.5, as indicated by the accompanying (eyeballed) dashed line.

Regarding orbital stability perpendicular to the plane of the disk, we can see in Figure 11 that the force in the positive z-direction for radii beyond the disk is negative. By anti-symmetry, the opposite is also true. Thus, the force out of the plane of the disk is always restorative and, therefore, maintains vertical stability

(i.e., a vertical oscillation about the plane of the disk). One could imagine a horizontal orbit half way between two identical disks, but such an orbit would be vertically unstable, since a perturbation toward either disk would only create a growing force imbalance toward that disk. This is particularly true for r_a < 1, where the magnitude of the negative force is monotonically decreasing with z_a. The orbiting object would eventually collide with the disk. This trend would not necessarily hold for r_a > 1, such as r_a = 1.1, where the magnitude of the negative force increases with z_a for 0 ≤ z_a ≤ 0.3.

Radial stability of a circular orbit is discussed in [12] , which is a physics lecture. It occurs within the context of a coordinate system rotating with the orbiting particle, and thus includes the fictitious outward centrifugal force along with the real inward gravitational force. These two forces balance in the absence of a radial perturbation, thereby maintaining the orbital radius constant. In the presence of a perturbation, the author derives the condition for which an outward perturbation in the radius will induce a negative radial force, and vice versa, thereby causing an oscillation about the equilibrium radius. The condition for stability is:

$\frac{3}{\rho }+\frac{g^{\prime }\left(\rho \right)}{g\left(\rho \right)}>0$ (15)

where ρ is the radius of the unperturbed circle, g(ρ) is the negative of the gravitational force, and g'(ρ) is its derivative at ρ. Figure 22 is a plot of the above expression, called “stability condition”, for the field of a thin disk, as in Figure 7. Since extreme accuracy was not required for the current purpose of displaying the range of stability, the derivative was approximated by differences between successive calculated points. We see that radial stability occurs only for r_a ≳ 1.15. If the field behaved according to an inverse-square law, as outside a sphere, stability would occur for all values of r_a.

7. The Escape Velocity of the Earth from the Milky Way

In this section, we shall calculate the escape velocity from the disk-approximation of the Milky Way based solely on the gravitational attraction to an escaping object as a function of its location within the galaxy. The object’s orbital motion, or

other motion, within the galaxy, which influences the escape velocity, is not considered. As is well known, the escape velocity or, more properly, the escape speed, v_esc, is computed by equating the object’s initial kinetic energy to the negative of its initial potential energy. Thus,

$v_{esc}=\sqrt{2V\left(r_a\right)}$ (16)

where V(r_a) is the potential energy, as in Equation(4), using a relative coordinate. This expression gives the escape velocity as a function of position within the disk. Figure 23 is a graph of the computed escape velocity vs the radial position of the object. Since our solar system is ≈26,000 ly [9] from the center of the Milky Way, r_a for it ≈ 0.5, where its computed escape velocity from Equation (16) is 684 km/sec. A reported value is ≈550 km/sec [9] . The 24% discrepancy could be considered fortuitously small, in view of the uncertainties of the various estimates in the literature and the use of the disk approximation in this paper.

8. Summary

In this paper, we have presented certain aspects of the gravitational characteristics of the disk geometry, including an ideally thin disk, a disk of finite thickness, and a thin disk in the form of a ring, though not thin walled. This geometry has been less studied than that of a sphere, which, because of its higher degree of symmetry, is simpler to analyze. Aside from its interest simply as a physics problem, certain astronomical objects, such as the Milky Way and protoplanetary disks, are disk-like in shape. In that regard, we have also presented calculations of the circular orbits in the plane of the Milky Way, approximated as a disk, concerning their orbital period and orbital stability. The escape velocity of an object, particularly at the position of the solar system, has been similarly calculated.

Acknowledgements

The author thanks W. F. Filter, retired Sandia National Laboratories physicist, for reviewing the draft of this paper and making many valuable suggestions for its improvement.

Conflicts of Interest

The author of this paper declares that he has no conflict of interest of any sort, particularly as described by the journal under “potential conflict of interest.”

Cite this paper

Weiss, J.D. (2018) Certain Aspects of the Gravitational Field of a Disk. Applied Mathematics, 9, 1360-1377. https://doi.org/10.4236/am.2018.912089

References