ABSTRACT

The last few years numerous publications have been published about the properties and plant origin of propolis, the glue-like resinous product collected by honeybees. Although, only one scientific experiment has been previously conducted on propolis collection techniques by honey bees, making the relative literature extremely limited in this area. The present study scopes to evaluate the effect of the trap types on the quantity of propolis collected by honeybees. For this reason, at two different locations, five different types of propolis collection traps, applied on Langstroth bee hives, were tested: 3 hand-cut screens plus one commercial screen on the top bars, as well as a lateral side modification of a Langstroth hive. Results show that two hand-cut screens with smaller openings (1 × 1 mm and 2 × 2 mm) as well as the commercial screen collected significantly more propolis than the others (F_4,41 = 43.21, P < 0.0001). Furthermore, the two hand-cut screens filled faster with propolis.

Keywords:

Propolis Collection, Honeybee, Langstroth Hive

1. Introduction

The word “propolis” is compound, derived from the Greek words πρό (pro = before) and πόλις (polis = city), which means the last defense point before the city (or the hive). The use of propolis dates back at least to 300 BC [1] , when its resinous and glue-like properties were made use of. Greeks have used propolis for abscesses; Hippocrates recommended propolis on wound’s healing while Democritus suggested that longevity and health could be accomplished by the consumption of bee products among which, propolis. Assyrians have used it for healing wounds and tumors while Egyptians had included propolis in the mummification ingredients [2] .

Propolis is made from raw-materials collected by honeybees from living plants after mixing with wax and it is used for construction of their hives, to seal hive walls and strengthen comb cells [3] [4] [5] . Bud resins mixed with bee salivary enzymes [6] and beeswax have been used in the hive not only as a building material, but also as antimicrobial agent against a wide variety of pathogens (bacteria, fungi, protozoa)and pests (mites) [7] [8] [9] . Worker bees bring these pathogens into the hive and are common in the honeybees’ natural environment [10] . Owing to its antimicrobial properties, propolis can reduce disease at the colony level and provide social immunity to the bee family [11] . Propolis antimicrobial activity has been attributed to flavonoid aglycones and phenolic and hydroxycinnamic acids. The content in bud resins of different plant species varies widely [12] . Propolis has 500 times more flavonoids than orange fruit. It consists of more than 200 ingredients, which make it “veritable cascade of aromatic nutrient” remarkable to fight all type of pathogens [13] . In one recent analysis of propolis, 150 compounds were identified in only one sample [14] . Although, it appears that with every new analysis applied, new compounds are found.

The composition of propolis varies and depends on the surrounding plants. Differences in color, odor and chemical compounds are observed depending on the source and the season of gathering [15] . Moreover, some colonies seem to show more avid behavior on propolis collection.

A large variety of trees and shrubs is used by bees to collect propolis resins. Each region and colony seems to have its own preferred resin sources, which results in large variation of final composition. In Europe, honeybees preferably collect resins from leaf buds of Populus species [16] .

The average production of propolis per colony per year has been described as 10 to 300g but the production depends on the bees, the forest resources, the climate and the trapping mechanism [17] [18] .

Most of the methodology used to collect propolis, comes from practical knowledge and techniques used by bee-keepers, but because of the wide range of variation those techniques are not comparable. The most commonly used collection methods employ special traps placed on top of a hive, below the covers or next to lateral walls inside the hives so that bees do not mix wax with the propolis and no contamination occurs during harvesting [16] [19] [20] [21] . Traps are screens with small holes which simulate cracks in the hive walls. Bees try to seal the holes and fill the trap with propolis. The most economic trap design is an inner cover with a large hole, covered with regular nylon fly screen, secured in place by the points of nails and a perforated frame [16] [19] [20] [21] .

A factor to be evaluated is the presence of light and air circulation in the stimulation of propolis collection. Slightly opened covers over the traps are used as a methodology for this reason.

Propolis is removed from traps by cooling the plastic sheets or fly-screens for a few hours in a refrigerator or freezer. Once cooled, the propolis becomes brittle and can be removed from the screens by simply flexing and brushing them, preferable in a cold environment as the heat makes it sticky again. The trap is then ready for re-use [16] . Although, only one scientific experiment has been previously conducted on propolis collection techniques by honey bees [22] . Results of this study indicated that a Langstroth hive with the lateral side modified in order to receive an aluminum plate produced the highest amount of propolis. Although, the lack of other studies on that field, makes the relative literature extremely limited.

Objective of the present study is to evaluate the effect of the trap types on the quantity of propolis collected by honeybees.

2. Materials and Methods

2.1. Location and Duration of Study

The study was conducted in two different locations for 2 years, from 2013 to 2014. The first location was the Institute of Agricultural Sciences (I.A.S.) in the Syggros Estate, at Amaroussion, Athens, Greece (38˚03'42.0"N, 23˚48'41.2"E, 270 m elevation)and the second was the apiary of the Apivita S. A. facility, in Markopoulo Mesogaias, Attika, Greece (37˚52'02.1"N, 23˚54'44.4"E, 200 m elevation). The two locations were in about 30 km distance from each other. Monthly average temperature and relative humidity for I.A.S. area was 24.6˚C/47.6%, 26.9˚C/44.8%, 26.3˚C/46.1%, 22.1˚C/55.7% and for Markopoulo Mesogaias 25.2˚C/52.8%, 28.0˚C/47.0%, 27.8˚C/47.1%, 24.2˚C/53.4% for June, July, August and September, respectively.

2.2. Characteristics and Setting of Hives

Thirty Langstroth hives colonized by Apismellifera Macedonica with 1-year queens were placed in circular settlement with 3 m. distance from each other. Each hive was placed on a metal stand of 25 cm in height. Colonies were equal in adult and brood population (9 and 4 frames, respectively).

2.3. Experimental Plan

Five different propolis collection traps were tested on the quantity of propolis they collect. The tested traps were 4 different screens placed on the top bars and a hive modification, as follows:

1) Commercial plastic screens with rectangle openings (3 × 16 mm) (Figure 1(a)).

2) Polypropylene hand-cut plastic screens with 4 × 4 mm square openings (Figure 1(b)).

3) Polypropylene hand-cut plastic screens with 2 × 2 mm square openings (Figure 1(c)).

4) Polypropylene hand-cut plastic screens with 1 × 1 mm square openings (Figure 1(d)).

5) Modified Langstroth hive body (Figure 1(e)).

The hand-cut screens were attached with small pins in a wooden frame, 2 cm in height, which also acted as apostate from the top cover. The commercial screen was attached as commercially suggested. The modified Langstroth hive was constructed with a 15 × 55 cm aluminum plate inserted in the lateral side of Langstroth hive body, according to Abu Fares et al. (2008). Rectangular slots (45 × 0.4 cm) were made in the plate with 1 cm spaces between them (Figure 1(e)).

Five replications per treatment were used under the Completely Randomized Design. Hives were inspected twice per week. Whenever the first screen was filled with propolis, all the screens were removed and transported to the laboratory of the I.A.S.. Screens were placed in plastic bags and freezed (−18˚C) for 24 h. Then, propolis removed by simply flexing the screens above a clean paper sheet on the laboratory bench and weighed. Four repetitions were performed with different screen assignment per repetition: in June 2013, September 2013, July 2014 and September 2014.

2.4. Data Analysis

Data were subjected to log-transformation and then to one-way analysis of variance, or t-test. Differences between treatment means were tested for significance with Tukey’s HSD test (P = 0.05). All analyses were conducted using JMP (Version 13; SAS Institute, Cary, NC).

3. Results

Statistical analysis showed significant differences in the collected propolis between the different screens (F_4,41 = 43.21, P < 0.0001).

Screens with 1x1mm openings collected the most propolis (29.57 ± 7.59 gr), followed by those with 2 × 2 openings (23.70 ± 5.63 gr) and the commercial screens (15.62 ± 4.05 gr), without any significant differences between them) (Figure 2). In the 4x4mm screens significantly less propolis was collected (1.15 ± 0.90 gr) compared with the other screens, while in the lateral modified hives no propolis was collected. It has to be mentioned that bees were noticed to put propolis in the screens in order to seal the spaces between the wooden frames.

Mean collection time for all the aforementioned quantities was 20.5 ± 0.5 days. In two of the repetitions the 2 × 2 mm screens were filled faster and signed the removal of all the screens and, so, the beginning of the first measurement. In the other two, the 1 × 1 mm screens were filled faster.

No significant differences observed between the areas (t = 0.53, P = 0.602) and the dates (F_3,41 = 2.26, P = 0.110).

4. Discussion

The present study indicated the differences in the quantity of the collected propolis between the different screens, or hive modifications. The plastic screens over the top bars were found to collect more propolis compared to hive modifications. Between the screens with the square opening, the 1 × 1 mm were the most preferable, followed by the 2 × 2 mm, while the 4 × 4 mm were the less preferable and collected significantly less propolis. Also, the first two were filled

faster with propolis compared with all the other treatments. The lateral hive modification did not collect any propolis during the first two repetitions of the experimental procedure. Results do not agree with Abu Fares et al. [22] , who found that the lateral-side modification collected more propolis than the plastic top screen and the back-side modification. A possible explanation of this could be the different environmental conditions between Jordan and Greece. This explanation agrees with Lebedev [23] , who refers that honeybees prefer to fill with propolis firstly the upper part of the hive, where the main temperature loss is happening. Generally, temperature loss is a great stimulus for bees to collect and store propolis. This is supported by the difference in the quantity of the collected propolis (15.77 gr. per hive the yearly maximum for Jordan [22] , compared with 29.57 gr. for Greece, in only three months of experimentation in our study), if we take in account the lower average temperature in Greece comparing with Jordan.

Results of the present study indicate that screens with smaller openings are collecting more propolis in shorter time. Screens with 1 × 1 mm and 2 × 2 mm openings collected more propolis than those with 4 × 4 openings. Furthermore, the first two aforementioned screens were filled with propolis faster than all the others. Our results agree with Lebedev [23] who refers that honeybees are much more active in filling smaller cracks than bigger. This may be due to the ease of filling the smaller cracks than compared with the bigger.

Propolis collection from honeybees in the current study appears to be attributable primarily to use over the top bar screens, with the exception of these of large opening dimensions (4 × 4 mm). In the lateral side hive modification, no propolis was collected. Although no significant differences were found between the two hand-cut screens with small openings and the commercial screen, the first two collected more propolis in a shorter period. These results suggest a way in which the beekeepers can construct their own propolis collection screens with a much lower budget (reduced about 90%: about 0.20?vs 3 - 7?per screen), which can collect more propolis in a shorter period of time. Further studies are needed to elucidate the effect of other factors in propolis collection, as the race of the bees and other techniques.

Acknowledgements

The authors would like to thank Mr. Sotirios Strigkos for the technical support in beehive keeping.

Cite this paper

Tsagkarakis, A.E., Katsikogianni, T., Gardikis, K., Katsenios, I., Spanidi, E. and Balotis, G.N. (2017) Comparison of Traps Collecting Propolis by Honey Bees. Advances in Entomology, 5, 68-74. https://doi.org/10.4236/ae.2017.52006

References